*Due to circumstances outside of Multipure’s control, the Multipure Aquasource is not available for overseas sale or shipment to Puerto Rico, Hawaii, Alaska and Canada.
The Multipure Aquasource* is a whole-house water solution, providing powerful filtration at point-of-entry, and ensuring that every water source in the home delivers cleaner, more healthful water. This system installs in the garage or basement, near the water heater, as a fixed-location filtration element. An array of multiple solid carbon block filters ensures that it reduces the presence of contaminants while maintaining the high water pressure needed to supply all the sinks, baths, and showers in your house.
The set of three (3) filters required for the Aquasource will arrive in a separate shipment (at no additional S&H cost).
*The Multipure Aquasource has not been tested, and make no claims for the reduction of contaminants of health concern.
Drinking water pollution comes from many sources. Surface water can become contaminated with agricultural runoff, community landfills, and hazardous waste from manufacturing byproducts. Groundwater can become contaminated from gasoline and MTBE leaks from underground storage tanks, or from the injection of hazardous waste into deep wells. Significant growth of the drinking water treatment industry can be attributed to the consumer demand for products that can 1) protect them from potentially harmful contaminants in their drinking water, and 2) improve the aesthetics of their drinking water.
The effectiveness of any drinking water treatment device is measured by the performance of its filter. A close review of drinking water treatment unit certifications shows that Solid Carbon Block filters are the most effective for reducing a wide range of contaminants, including those that may be found in groundwater. Certain drinking water treatment units utilizing Solid Carbon Block filters have been tested and certified to reduce upwards of 65 contaminants.
Solid carbon block filter technology was developed by Multipure in the early 1970s for the purpose of treating water contaminants for health and aesthetic reasons. This technology combines mechanical filtration, chemical reaction, and physical adsorption into a single device to reduce a broad spectrum of harmful contaminants.
Activated carbon is the primary raw material used in Solid Carbon Block filters. These activated carbons are effective in reducing disinfection by-products (DBPs), volatile organic compounds (VOCs), PCBs, MTBE, and other contaminants.
Summary. Solid carbon block filters effectively treat contaminants such as lead, chlorine, benzene, MTBE, chloramines, and PCBs. Solid carbon block filters will likely prove capable of significantly reducing contaminants that may be found in drinking water supplies in the future, such as antibiotics, drugs, and other personal care products. The effectiveness of Solid Carbon Block filters in treating a broad spectrum of contaminants of aesthetic as well as health concern makes it the bona fide technology of choice consumers throughout the country.
Replacement Filter Type: Model CB20* (optional CB20LSI)
Approximate Capacity: 30,000 gallons per cartridge*
Approximate Flow Rate @ 60 psi: 10-12 gpm @60 psi**
Housing Composition: 304 Stainless Steel
Rubber Items: Silicone
System Size:41” h x 16” d
System Weight (without cartridges): 120 lbs
Filter Cartridge Size (each): 20” h x 4.75” d
Filter Cartridge weight (each): 6 lbs
Working Pressure Range: 30 psi (2.1 kg/cm2) to 100 psi (7.0 kg/cm2)
Operating Temperature Range: 32o F (0o C) to 100o F (38o C) – for cold water use only